NEW THUNDER TIGER Raptor 90 3D helicopter kit -

Raptor 90 3D kit

Features:

Machined metal main rotor hub New nonlinear stiffness flapping damper Machined metal bearing blocks for main rotor shaft Aluminum seesaw that permits three different Bell-Hiller mixing ratios Bell-Hiller mixing arms with holes for different control sensitivities Light weight 30 grams Hiller control paddles for 3D flying Push/Pull system for collective, roll cyclic and forward/aft cyclic control Machined metal forward/aft cyclic control lever Carbon graphite 3D vertical fin Light weight tail boom bracket for attaching tail boom support 8.27 to 1 gear ratio for 3D flying ( 91T main gear and 11T pinion )

Specifications:

Full Length of fuselage: 1410mm (55.50") Full width of fuselage: 190mm (7.50") Total height: 476mm (18.75") Main rotor dia: 1605mm (63.25") Tail rotor dia: 260mm (10.25") Gear ratio: 8.27:1:4.65 Full equipped weight: 4800g (10.5 lbs)

Required:

Radio Set - Transmitter (6 or more channels) with receiver and crystal 680/720mm Blades High Torque Servo x 4, Receiver, Battery Switch Harness High speed tail servo and Gyro. .90 sized Heli engine with Glow Plug, Field accessories Assembly

Policy, Terms and Conditions:

Full payment MUST be received within 2 (TWO) DAYS. Immediate payment appreciated.

Non- Paying Bidders WILL BE REPORTED

EXCHANGES ONLY within 5 days only on damaged insured shipments.

Will NOT ship to P.O. Boxes.

Please email us if the item is not received within 10 days of payment being made (30 days for international shipments) and we’ll conduct an investigation.

If you choose to leave us negative feedback on eBay before attempting to resolve the problem, WE WILL ACCEPT THIS AS FINAL RESOLUTION TO THE MATTER.

Feedback WILL be left IMMEDIATELY and PROMPTLY AFTER RECEIVED

ALL SALES ARE FINAL

 

 Have fun bidding and GOOD LUCK

items ship in 4 days

 

Please feel free to email us using "ask seller a question" for PROMPT response with any questions regarding the item or transaction.