~Pictures show what actual stickers will look like~

These High Quality Decals will stick to ANY smooth surface:
Glass, Metal, Paint, Tool Boxes, Trailers, Cars &Trucks, smooth Walls and Doors, anything smooth!!

You can choose your color below please read the color choice instructions carefully!

Approximate Size of Sticker: 2.5"x8.5" BIGGER THAN OTHERS ON EBAY

You will get 1 New:        GOT  NAUTIQUES?_____Sticker/Decal!

All of our stickers are made of 5-8 year vinyl and we are sure you will be happy with the quaility of your sticker.

You can choose your color from the color choices below and follow the color choice instructions. If you do not specify a color as described below you will get white.

Color Choice Instructions: When you are paying for your item, if you are using paypal there will be a note box during the payment process on paypal that says "additional notes to seller" please indicate your color choice in that box. Do Not use the note box on ebay because I will not see the note. Be sure you are on payapl, and after you have paid please check your paypal note box to be sure the note is there.

Your color choices are: BLACK, BLUE, GOLD, GREEN, ORANGE, PINK, PURPLE, RED, SILVER, WHITE, YELLOW..  if you want another color just ask me I might have it... thanks!!

Installation instructions:

Each decal is made up of 3 Layers:
1. The top layer is transfer tape just like masking tape.
2. The middle layer is your vinyl decal.
3. The bottom layer is the paper backing.

1. Clean the area you are going to apply the sticker to throughly (note: Do not
   use windex or any other ammonia type cleaner, soap and warm water will do fine)
2. Measure and mark your location first before removing the paper backing from the sticker.
3. Peal away the paper backing of the sticker making sure that all of the sticker peices
   stayed attached to the application tape.
4. Place the adhisive side down against the chosen surface and using a credit card or
   something similar, rub the surface thoroughly working any bubbles toward the edge.
5. After a couple of minutes you can remove the application tape by pulling it straight
   back, be sure that the graphic has stayed on the surface and not the tape.
6. If you see any bubbles you can use a small sewing pin or thumb tack to poke a tiny
   hole and then push the bubble out of the graphic with your finger.

TIPS: Wait at least 24 hours before washing the surface the sticker was applied to. Do
      Not apply in tempatures above 90 degrees or below 40 degrees.
thats it, enjoy!!

Hello and thanks for looking... All stickers are usually made and shipped within 5-7 business days of your payment, then normal usps shipping times apply... please read all of the description carefully, and be sure to make your color choices on the paypal page or you will get the default color of the auction. Thank you again for looking!!!