Get rid of that heavy flywheel on your gas engine conversion!   Typically, you can save at least a pound of weight off your engine by converting to electronic ignition.  Most of the weight you get rid of by switching to this ignition is rotating weight also!  Your engine will hand start easier, spool up much faster, and go on a diet at the same time!

 

For installation instructions go to: http://www.syssaaircraft.com/

When there click download and then click gasoline ignition instructions.

 

All our ignition systems come with new spark plugs and our flush mount switch with charging jack and magnet.

 

If you have any questions, feel free to email or call (860) 538 - 2937.

 

When emailing questions or calling, please let us know which spark plug you are using!

 

NEW!!! Attention Zenoah and CY fans!!! Please see the first unit listed here...it fits many of your favorite engines!

 

CMR7H (10mm Thread) Metal Gasket Seat 14mm hex, 1/2" reach (from the end of thread to seating surface),

 

BPRM6F (14mm Thread) Tapered Seat  5/8" hex, 3/8" reach (from the end of thread to seating surface)

 

BMR6A (14mm Thread)  Metal Gasket Seat 3/4 hex, 3/8" reach (from the end of thread to seating surface),

 

CM-6 (10mm x 1.00 Thread) Metal Gasket Seat 14mm hex, .339" reach (from the end of thread to seating surface)  (please add $5)

 

ME-8 Size (1/4-32 Thread) "Rimfire" ($13 extra)

In your paypal payment or email, just mention in your email which spark plug you are using.  We have never had a customer that was not able to use one of our ignitions for their application! Twins are available...just ask!

We also have a 14mm to 10mm thread adapter that allows you to use the small and lightweight CM-6 style plug with a 14mm spark plug thread!  If you would like this please add $8.00 to your total and put in the paypal notes that you want the CM-6 version with adapter.

Includes everything you need to install into your gas engine conversion including the correct magnet for the hall effect sensor and new  spark plug.  You provide your favorite switch and 4.8 battery and a hub for the special magnet that is included.

These ignitions are reliable, efficient, fit almost any size gas engine, and are a favority among gas fliers today. Fly for hours with a simple and inexpensive 4.8v pack.

For all you "weight weenies" out there, yes, you can use a AAA, 900 mah, 4.8v pack!  Use this as a replacement for your malfunctioning stock ignition or for your new gas engine conversion!

We fly gas, are very familiar with gas engine installations and can help with your questions...we're not just someone selling these parts with little or no knowledge of how to actually use them.

Please note: you will need to perform some custom fabrication of brackets and a magnet holder (hub) will need to be made for your specific engine. Some engines are more difficult than others to mount the brackets to.  Do not use your magneto flywheel with this system as the heavy magnet can damage the hall effect sensor.  If you are replacing an ignition system and you have only one magnet on your flywheel and your hall sensor is working, usually you can just rewire the hall sensor to our ignition.  This will save a ton of time making brackets to hold the hall sensor.  If you have two magnets, one will have to be removed and the hub will have to be balanced.  Then arrange the system to fire at your desired ignition timing.  As always, please call or email with any quesions!

Here are the specs of the ignition system:

0-12,000 rpm capable   Lightweight at only 4 ounces Auto advancing/retarding for easy flip starts  (standard magneto ignitions generally require the prop to usually be flipped very fast, making hand starting difficult or impossible) Very low battery drain (we usually get at least 2.5 hours flying time on a 1650 mah, 4.8 V battery) Quality RF shielding system without clumsy ground straps  During low battery condition, ignition will not just shut off totally...it will cut out intermittently at higher rpms, this warns you and gives you plenty of time to land - so you don't crash your plane Latest Version - Version 2 Magnet can be held in drilled hole with red or green loctite .040" - .080" gap between hall effect and magnet is preferred Two year warranty Shipped from Connecticut, USA to any country we can legally ship to (International shipping is usually $23 extra because we ship express only) Shipping USPS 2-4 day shipping is on us to anywhere in the lower 48 - you will get it in a few days!

Our CDI (Capacitive Discharge Ignition) package comes with the following:

The switch you receive with our system also comes with a built in charging jack and a small door to cover the charge jack when not in use.  These switches typically sell for $13 - $17, have gold plated contacts and positive switching action for reliability and long life.  This switch plugs directly into our ignition and the other end plugs into your battery giving you a no-hassle, clean and reliable install that allows charging of your battery without even removing your access panel!

Switch cutout is .600" (15.25mm) tall x 1.325 (33.6mm) wide.  Hole spacing for screws is 1.535" (39mm) between centers.  There is a nice rubber gasket that keeps everything tight and sealed against your fuselage.  A photo is also attached to show how it installs.

Our ignition setup is truly the most complete found anywhere in the world.  We ship worldwide!  Shop around...compare exactly what you are getting with what is out there...With us, you're not just getting an ignition, you're getting a package deal!

Thanks to all our customers in the United States, throughout Europe and down under! 

Paypal to syssaaircraft@gmail.com is preferred, but not required (except for out of USA sales.)