RC & ME is proud to offer:

 

100% professionally Built, configured and tested T-Rex 600Nitro Pro Kit

By our AMA certified trainer and Pro Builder.

 

You will get the following:

 

1. A T-Rex 600N Pro Kit, Carbon Fiber with Torque Tube Drive system and Red Canopy.

2. A Spectrum DX7  Heli radio system with 7000 RX and 4 x 821 servos (821 servos will be used for cyclic control)

3. A Futaba Gyro and matching 9254 digital High speed servo

4. A set of 600MM Carbon Fiber main blades

5. An OS 50 Hyper motor, Align Pipe and header Tank

6. Misc Remote Glow, 2000mah NIMH Battery, meter and more.

6. 100% built and ready to fly.

 

*** Our pro builder will completely build the heli, install the electronics, set-up the radio and configure the entire system. Once done, the heli will be taken and test flown, adjusted as needed till perfect and packaged for a safe trip to you.***

 

Why gamble on buying a complete system from overseas when you can get local USA support by RC & ME?

 

 

T-REX 600 Nitro Pro Superior Kit (Torque Tube Driven/Red Fiberglass Canopy) [KX0160NPB]

Product: Focus Shot1(High precision main rotor assembly and new main rotor holder) Focus Shot2(New sport flybar control set design) Focus Shot3(Tail rotor assembly with double bearings and heavy duty tail with thrust bearings) Focus Shot4(New efficient Torque Tube driven tail design) Focus Shot5(New-sturdy lightweight main frame, fuel tank 440cc) Focus Shot6(Special H type mounting tray) Focus Shot7(Clutch/Start shaft feature a 10mm ID one way bearing) Focus Shot8(Super efficient, lightweight engine cooling fan) Focus Shot9(Including Feul tube, Fuel filter, and New Fuel tube clip) Focus Shot10(New Tail rudder rod system) Focus Shot11(New landing skid) Focus Shot12(Painted fiberglass canopy) Package: Instructions: Specification: �Instruction Manual】 �Features 1.Both the T-Rex 600 Nitro and 600 Nitro Pro include a Beautiful factory painted fiberglass canopy. Canopy also features a rigid easy clip on/off design for fast installation and removal. 2.Simple and light weight design provides awesome flight performance nearly equal to larger helicopters while still maintaining very stable hovering and flight. 3.+-14° collective pitch is possible for extreme 3D performance. 4.Clutch, Fan and Bell assembly provide a very smooth operation even at high RPM. 5.Forward mounted tail servo helps to keep exhaust oil from entering servo also improves the CG. 6.Pitch and All servos moved forward for CG. 7.Battery tray designed for easy and clean radio gear installation. 8.Fuel Tank Capacity 440cc for about 10 minutes 3D flying. 9.Main Gear Radio 8.5:1, 1500-2200 Rotor RPM. 10.Heavy duty tail with thrust bearings. 11.95mm Tail Blades. 12.Torque Tube driven tail for incredible 50 sized performance. 13.Rigid frame design that can also handle hard crashes without damage. 14.Carbon Fiber frames, fins and boom supports. 15.Super engine cooling system features large diameter fan and very efficient airflow to provide unequaled cooling and horsepower. 16.Clutch/Start shaft feature a 10mm ID one way bearing to eliminate any bearing problems during starting and flight. 17.Ready to fly weight (no fuel) is an incredible 3.20Kg (7lbs). 18.Fuel Tank designed so that no additional header tank is required. 19.New main gear with one-way bearing design for high torque. 20.New flybar paddles feature light weight and sports. 21.New flybar control set design. 22.New tail boom supports. �Length:1160mm �Height:410mm �Main Blade Length:600mm �Main Rotor Diameter:1350mm �Tail Rotor Diameter:240mm �Engine Pinion Gear:20T �Autorotation Tail Drive Gear:180T �Drive Gear Ratio:8.5:1:4.5(E:M:T) �Flying Weight:Approx. 3200g �Color carton:72x25.7x12.5cm �Outer carton:74.5x52.5x39.5cm ,6sets/ctn Accessories: �T-REX 600 Nitro Pro Kits SetX1 set(w/o main blade) �Painted fiberglass canopyX1 �Feul tubeX1 �Fuel filterX1 �New Fuel tube clip(A)X1 �New Fuel tube clip(B)X1 �New landing skidX1 Radio transmitter and electronic equipment required for assembly: �Transmitter(6-channel or more, helicopter system) �Receiver(6-channel or more) �Standard servoX4 �Head lock gyroX1 �Specialized servoX1 �600 bladeX1set �Pitch gaugeX1 �50 mufflerX1 �50 engineX1 �Engine starter/Starter shaftX1 �11.1~14.8V Li-Po 2500mAh starter batteryX1 �2 in 1 regulator(RX and Glow plug power)X1 �7.4V 1900mAh Li-Po battery for regulatorX1 �Fuel pumpX1 �Engine fuelX1

 

 

 

DX7 7Ch Heli w/AR7000 & 3-DS821 MD2

The first full-range 2.4GHz system for all types of aircraft is here Spektrum’s DX7 2.4GHz 7-channel programmable system featuring DSM2.   Features   20-Model memory Airplane and Heli software Switch assignment P-mixes Includes 3 powerful DS821 digital servos with high-tech resin gears 3-axis dual rate & expo 3-position flap (Airplane) 5-point throttle curve (Heli) 3 flight modes plus hold (Heli) Gyro programming (Heli) CCPM, 2-servo 90°, 3-servo 90°, & 3-servo 120° Configured to default, helicopter model type (all airplane programming is available)   Overview   With the DX7 you’ll be able to fly anything from micro electric heli’s, to big gas-powered IMAC planes without regard to frequencies and free from fear of interference. Calling this kind of thing “revolutionaryâ€�  just doesn’t cut it. It is nothing less than a quantum leap in RC technology that will change how you fly forever. Never again will the availability of a frequency pin dictate when you can take off. Never again will you have to ask, “What channel are you on?â€� Never again will your flying experience be interrupted by model-generated RF noise, interference from commercial broadcast towers, or anyone on another RC system.   THE TRANSMITTER: The DX7 DSM2 transmitter features airplane and heli software, 20-model memory and all the programming functions you would ever need for anything requiring 7 channels. And the large dot matrix, LCD screen makes accessing and using the software simple and straightforward.   THE SERVOS: The Three DS821 servos that come with the DX7 put out an impressive 72 oz/in of torque that is suitable for a wide range of electric, gas or glow aircraft. Their digitally precise output is further enhanced by a robust, high-tech resin gear train that is exceptionally durable for reliable performance flight after flight.   THE AR7000 RECEIVER: The AR7000 Dual Receiver is capable of providing outstanding signal reception beyond visual range, so you can rest assured you have locked-in, precise control no matter how fast you fly.

 

Futaba GY401 Gyro w/S9254 Digital Servo

This is the Futaba GY401 Gyro with an S9254 Digital Servo.This is a high performance, compact and lightweight(AVCS) Angular Vector Control System gyro developed for model helicopters.Because the sensor and control circuit are integrated, it is simple to install. FEATURES: AVCS System: Since the rudder trim changes (caused by wind and otherMeteorological changes) the front, rear, and other heli attitudesChange and are automatically cancelled; tail (rudder) operation isEasy, making it perfect for 3D flight.(also known as heading hold gyro)SMM Gyro Sensor: Use of this newly developed technology virtuallyeliminates rudder trim changes during flight (see COMMENTS).Digital Servo Compatible (DS Mode): DS mode makes it compatible withFutaba Digital Servos. This maximizes the high-speed responseperformance of the Digital Servo.Included high-speed S9254 Digital Servo boasts 47 oz-in torque and aspeed of .06 sec/60°Remote Gain Function and Mode Switching Function Remote: Gainfunction allows sensitivity switching from the transmitter and modeswitching function allows AVCS/normal gyro mode switching.Integrated, compact and lightweight design made possible by highdensity mounting technology.Conductive Resin Case: This case improves EMC (Electrostatic andelectromagnetic interference) resistance.One year warranty 

 

100% fully built, configured and tested..

we can also custom build one for you using your choice of radio, gyro, servos. We offer JR, Spektrum, Futaba, and others. Pro built Align 600CF, 500CF and 450SEV2 Kits available. Pro built Raptor Nitro kits available Century Pro kits and many many more

 

We provide full on-going support for all our products…. All parts are also available at our El Paso, TX located store…. Come on by and fly with us!!

 

Thank You…