Origami

 
 

How To Make Wolverine Claws


 

Origami Animal - How to Make the Origami Wolverine 1



1 - How To Make Wolverine Claws
How To Make Wolverine Claws
Autor: BadgerLALA
Category: Howto & Style
Published: 2010-01-25





2 - How To Make Wolverine ClawsHow To Make Wolverine Claws. This is how I made my pair of Wolverine claws. Its simple and not so expensive. :) Hope they can help you in some way. Good luck and dont poke out someones eye!

1 First make a template in paper. It shall be about 30 cm long. NOT LESS OR MORE! Then cute down 1 cm and in 5,5 cm at the end of the claw. This make it look more like the claws comes out from between your knuckle.

2 Use the template and draw six claws on the cardbored.
Tip!
Draw one extra claw just in case you fail when you cut them out later on.

3 Cut out the claws coarse. Its much easier to do this before you to cut out the claws properly from the cardborad.Use something to cut against. I used an old plank
Tip!
Cut with a knife not a scissors.

4 Let the fun start. Cut carefully out the claws. DONT RUSH! Take your time. Its important that you do this right and precisely. But if you fail with one claw you always have one extra.

5 Before you put together the claws you have to colour them. Here we use silver spray paint. Its easier and dont get as messy as regular paint.

Tip!
Remember to cover all sides.

6 When the paint has dried its time to put the claws together. First cut out two pieces, one 6 cm long and one 3,5 cm long. Plug in the gluegun so its really warm until it's time to use it.

7 Take 6 cm long piece and put it in your palm and mark out where the claws comes in through your fingers. Remember that outer claws bends out like a v and the middle claw goes straight up.

8 Now glue the claws on to the piece. Here you use the glue gun (or someone else fast drying glue). Dont be stingy with the glue. Its very important that this keeps together

9 Now its time for the 3,5 cm long piece. Glue it on to the top of the claws. Do the same things to the claws to your left hand.

3 - How To Make Wolverine ClawsThis How to make an Origami How To Make Wolverine Claws Model was made on 2010-01-25 by BadgerLALA. In this section you will find a Video Tutorial published on YouTube, about how to fold an origami model or the step by step instructions to make it. I hope you found the instructions clear and I hope you enjoy folding It.
 

 
 


 
 

Animal Video Gallery > Wolverine 1 > How To Make Wolverine Claws








Related Videos

how-to-make-paper-wolverine-claws
How To Make Paper Wolverine Claws
easy-to-make-wolverines-adamantium-claws
EASY To Make WOLVERINE'S Adamantium Claws
wolverine-claws-bfx-build
Wolverine Claws : BFX : Build
old-wolverine-claws-assembly-instructions-december
Old Wolverine Claws Assembly Instructions December 2012
x-men-cyclops-visor-cosplay
X-Men Cyclops Visor - Cosplay
how-to-make-wolverine-bone-claws
How to make Wolverine Bone Claws
make-authentic-wolverine-claws-las-garras-de-wolve
Make Authentic Wolverine Claws (Las Garras de Wolverine)
x-men-origins-wolverine-movie-electronic-claws-rol
X-Men Origins Wolverine Movie Electronic Claws Role Play Toy Review
prop-wolverine-claws-tutorial
Prop Wolverine Claws Tutorial
retractable-wolverine-claws
Retractable Wolverine Claws
how-to-make-wolverines-claws-halloween-prop
How to Make Wolverine's Claws--Halloween Prop
how-to-make-the-super-boomerang
How to Make the Super Boomerang!


We need your Help!
If you liked our Website, Please support us, sharing it on Social Networks! Thanks!


        Comments:
Clément opsomer [21-Oct-2014]
Very fat shit !!! ?
Soft squishy [20-Oct-2014]
Plz make more vids like this
Omar garcía [20-Oct-2014]
Thank for you idea. help me for my cosplay wolverine in the expocomic.
Badgerlala [20-Oct-2014]
@sammandhann thank you :)
Mrdarthpig [19-Oct-2014]
You said cute not cut
Razziee eeks [19-Oct-2014]
Must it be a hot glue gun? what about super glue?
Soft squishy [19-Oct-2014]
I recognized that you made the vid before the egyptian revuloution by exactly one year! lol i more sub 4 u
Badgerlala [18-Oct-2014]
@mrmiko99 some thick. :) like people use to make signs. not any hollow they use to be in regular cardboard to boxes.
Mitko tallica [18-Oct-2014]
What cardboard do you suggest i use?
Bencapps1 [18-Oct-2014]
I just got done with mine. i still need to paint them though.
Jennablack7 [17-Oct-2014]
Omg xdd want some
Soft squishy [17-Oct-2014]
Can you get a printable template?
Manusfilm studios [17-Oct-2014]
Thank you so much man! you helped me alot!
Arconmeter [16-Oct-2014]
This is perfect they are almost like wolverine's claws
Therobloxfighter [16-Oct-2014]
I made some without spending a penny
Sammandhann [16-Oct-2014]
Hey i see my old buddy mm99 has noticed ur awsomeness!!! 1 more sub 4 u
Nagito komaeda [15-Oct-2014]
This is a great prop and tutorial for my friends nepeta leijon cosplay x) thanks
Danam861 [15-Oct-2014]
Cool
Badgerlala [15-Oct-2014]
No, super glue will work fine :) as long as the glue is quick drying.
Harley quinn [14-Oct-2014]
Im making nepeta claws and i was like 'wtf am i doing?!?' and this helped a lot! thank you!


Your Coment

 

 


 
 


[e-mail][Links eXchange] [Valid XHTML] [Valid CSS][Google]


[Pachano Morocota][Kids Paper Airplanes][Money Origami][Calculadora De Ovulacion]

Copyright 2007-2020 all rights reserved www.origami-kids.com


How to Make the Super Boomerang!







Origami Grave – Origami Halloween for Kids


Origami Skull Ghost by Riki Saito


Easy Origami Batman Mask by Barth Dunkan


Hello Kitty Origami 3D


Buho de Origami / Origami Owl (Design by Román Díaz)


Origami Owl by Stephen Weiss


Origami Owl by Davor Vinko. Folding Instructions


Easy Origami Baby Elephant. Easyphant by Enrique Martinez


Origami Hell Cat by Robert Harbin


Origami Coffin for Halloween by Hyo Ahn